13PCS Thin Wall Waterproof Sleeve Tubing Kits
13PCS Thin Wall Waterproof Sleeve Tubing Kits, Shrink Tube Kit By the irradiation of cross-linked polyolefin material composition, the scientific formula, mechanical blending into high polymer alloy, the product after the formation of electronic accelerator irradiation cross-linked, continuous expansion from.
Insulation Heat Shrink Tubing Kit, Heat Shrink Sleeve Kit thin wall tubing composition ideal for wholesalers, small shops, automotive repair shops or any electrical work shops.
Heat Shrink Tube Kit, Shrink Wrap Tubing Kit, Heat Shrink Tubing Kit with Plastic Bag Colorful Lowest Price.
* Large sizes are available
* Soft and flexible.
* Flame retardant, excellent sealing capability and Excellent Water Resistance.
Features:
100% brand new and high quality
Color: Yellow, Blue, Black, Green, Red
Supplied internal diameter: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm
Fully shrunk internal diameter: 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm
Specifications:
Material: Polyolefin
Color: Yellow, Blue, Black, Green, Red
Shrinkage Ratio: 2 : 1 (will maximum shrink to 1/2 its supplied diameter)
Material : Polyolefin
Minimum Shrinkage Temp : +70 centigrade
Full Shrinkage Temp : +110 centigrade (maximum)
Operating Temperature : -55 centigrade to +125 centigrade
Tensile strength: 10.4 Mpa
Dielectric strength : 15 KV/mm
Flammability : Flame Retardant
Cutting method : Scissors or sharp knife
| SIZE (MM) | As supplied (mm) | After recovered | Standard Length(Meter) | Application Range(mm) |
| Inner diameter(D) | Wall Thickness(T) | Inner diameter ( d ) | Wall thickness ( t ) | m/roll |
| φ0.6 | 0.9±0.2 | 0.20±0.05 | ≤0.40 | 0.33±0.10 | 200 | 0.5~0.7 |
| φ0.8 | 1.1±0.2 | 0.20±0.05 | ≤0.50 | 0.33±0.10 | 200 | 0.6~0.8 |
| φ1.0 | 1.5±0.2 | 0.20±0.05 | ≤0.65 | 0.36±0.10 | 200 | 0.75~0.9 |
| φ1.5 | 2.0±0.2 | 0.20±0.05 | ≤0.85 | 0.36±0.10 | 200 | 0.95~1.4 |
| φ2.5 | 3.0±0.2 | 0.25±0.05 | ≤1.30 | 0.45±0.10 | 200 | 1.4~2.3 |
| φ3.0 | 3.5±0.2 | 0.25±0.05 | ≤1.50 | 0.45±0.10 | 200 | 1.6~2.7 |
| φ2.0 | 2.5±0.2 | 0.25±0.05 | ≤1.00 | 0.45±0.10 | 200 | 1.1~1.8 |
| φ3.5 | 4.0±0.2 | 0.25±0.05 | ≤1.80 | 0.45±0.10 | 200 | 1.9~3.2 |
| φ4.0 | 4.5±0.2 | 0.25±0.05 | ≤2.00 | 0.45±0.10 | 200 | 2.1~3.6 |
| φ4.5 | 5.0±0.2 | 0.30±0.08 | ≤2.30 | 0.56±0.10 | 100 | 2.4~4.0 |
| φ5.0 | 5.5±0.2 | 0.30±0.08 | ≤2.50 | 0.56±0.10 | 100 | 2.6~4.5 |
| φ5.5 | 6.0±0.2 | 0.30±0.08 | ≤2.75 | 0.56±0.10 | 100 | 2.85~5.0 |
| φ6.0 | 6.5±0.2 | 0.30±0.08 | ≤3.00 | 0.56±0.10 | 100 | 3.1~5.4 |
| φ7.0 | 7.5±0.3 | 0.30±0.08 | ≤3.50 | 0.56±0.10 | 100 | 3.7~6.3 |
| φ8.0 | 8.5±0.3 | 0.30±0.08 | ≤4.00 | 0.56±0.10 | 100 | 4.2~7.2 |
| φ9.0 | 9.5±0.3 | 0.30±0.08 | ≤4.50 | 0.56±0.10 | 100 | 4.7~8.0 |
| φ10 | 10.5±0.3 | 0.30±0.08 | ≤5.00 | 0.56±0.10 | 100 | 5.2~9.0 |
| φ11 | 11.5±0.3 | 0.30±0.08 | ≤5.50 | 0.56±0.10 | 100 | 5.7~10 |
| .... | ... | ... | ... | ... | ... | ... |
| φ210 | ≥210 | 0.65±0.30 | ≤105.0 | 1.30±0.30 | 25 | 110~205 |
| φ230 | ≥230 | 0.65±0.30 | ≤115.0 | 1.30±0.30 | 25 | 120~225 |
| φ250 | ≥250 | 0.65±0.30 | ≤125.0 | 1.30±0.30 | 25 | 130~240 |
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Contact Now
